Basic Info.
Bracket Type
Single Bracket
Transport Package
Tons of Bags
Product Description
Product Description
Glass fiber rod is a composite bar that uses glass fiber yarn as a reinforcing material and synthetic resin as the matrix material.
Lightweight and high strength
The relative density is between 1.5 and 2.0, only 1/4 to 1/5 of carbon steel, but the tensile strength is close to, or even more than carbon steel, and the specific strength can be compared with high-grade alloy steel. As a result, it has excellent results in aerospace, rockets, space vehicles, high-pressure vessels, and other applications that require self-weight reduction. Some epoxy FRPs can reach tensile, bending and compressive strengths of more than 400Mpa.
Good corrosion resistance
FRP is a good corrosion resistant material with good resistance to the atmosphere, water and general concentrations of acids, alkalis, salts, and a variety of oils and solvents. It has been applied to all aspects of chemical corrosion protection and is replacing carbon steel, stainless steel, wood, non-ferrous metals, etc.
Good electrical properties
It is an excellent insulating material used to make insulators. Good dielectricity is still protected at high frequencies. Microwave transmission is good, has been widely used in radar radomes.
Good thermal performance
FRP has low thermal conductivity, 1.25~1.67kJ/(m·h· K), only 1/100 to 1/1000 of the metal, is an excellent thermal insulation material. In the case of instantaneous ultra-high temperature, it is an ideal thermal protection and ablation resistance material, which can protect the spacecraft from the erosion of high-speed air flow above 2000 °C.
Good designability(1) Various structural products can be flexibly designed according to needs to meet the requirements of use, which can make the product have a good integrity.
(2) The material can be fully selected to meet the performance of the product, such as: can be designed to be corrosion-resistant, resistant to instantaneous high temperature, the product has a particularly high strength in a certain direction, good dielectricity, and so on.
Excellent craftsmanship
(1) The molding process can be flexibly selected according to the shape, technical requirements, use and quantity of the product.
(2) The process is simple, can be molded at one time, and the economic effect is outstanding, especially for products with complex shapes and a small number of products that are not easy to form, and its process superiority is more prominent.
FRP Rod | Specification | Size (mm) Diameter | Approx Weight (kg/m) |
SR6 | 6 | 0.07 |
SR7 | 7 | 0.08 |
SR8 | 8 | 0.10 |
SR9.5 | 9.5 | 0.15 |
SRIO | 10 | 0.16 |
SRI2.7 | 12.7 | 0.25 |
SRI4 | 14 | 0.30 |
SRI9 | 19 | 0.57 |
SR24 | 24 | 0.90 |
1.Good dimensional stability.The thermosetting resin matrix is cross-linked under the action of heat during processing to form a body-shaped network structure, and its products are dimensionally stable under normal conditions, and the post-shrinkage after molding is also small. The shape and size of the product change very little under the continuous load for a long time, that is, the creep resistance is small. The creep performance depends on the size of the load, the temperature and the length of the loading time. Under fixed load and temperature conditions, heat-set after prolonged loading.
2.High resistant .The thermosetting resin-based composite material cannot be softened after curing. The heat resistance of its products is quite stable. It is measured with a load of 1.86 MPa. Generally, its thermal deformation temperature is within 150 ~ 260 ° C, and fiber-reinforced thermosetting plastics are excellent thermal insulation. Material, its thermal conductivity is generally 0.35 ~ 0.47W/(m.K), only 1/100 to 1/1000 of metal, can be used as a good thermal insulation material and instantaneous high temperature resistance material, the thermal deformation temperature of the material can reach 350ºC, can be used as normal and high temperature structural materials.
3.Excellent electrical performance.The composite material is an excellent electrical insulating material. If the product made of mica is used as a filler, its electrical properties are even better, and it can be used to manufacture special parts with superior arc resistance, voltage resistance and electrical induction. Due to the excellent electrical properties of the composite material, there is no electrochemical corrosion and stray current corrosion in its products, and it can be widely used in the manufacture of insulating parts in instruments, motors and electrical appliances to improve the reliability of electrical equipment and prolong its service life. . In addition, the products have good dielectric properties and microwave permeability under the action of high frequency, and have been used to manufacture a variety of high-frequency insulation products such as radomes.
4.Excellent corrosion resistance.Resin-based composite material is different from ordinary steel in electrochemical corrosion mechanism. It is non-conductive and will not dissolve ions in dielectric solution, so it has good chemical stability to the atmosphere, water and ordinary concentrations of acids, alkalis, salts and other media. It has good stability, especially in non-oxidizing strong acids and media in a fairly wide pH range. Therefore, it is currently widely used in the manufacture of corrosion-resistant products for the corrosion of certain media that stainless steel cannot cope with, and has played a good role.
Product Application
The tensile strength of pultruded products is higher than that of ordinary steel. The resin-rich layer on the surface also makes it have good corrosion resistance, so it is the best product to replace steel in engineering with corrosive environment, widely used in transportation, electrical, electrical, electrical insulation, chemical industry, mining, marine , boats, corrosive environments and various fields of life and civil use.
Company Profile
May Future (Lianyungang) New Materials Technology Co., Ltd. (hereinafter referred to as the company) is mainly engaged in new composite products and raw materials, mold equipment design, research and development, production, sales and service. The company's main business is pulled profile products and their accessories, new materials boat, the whole bathroom, new materials, grille, a variety of pipe rods, with pull-squeezing molding, vacuum perfusion, SMC-BMC, winding molding, roll-made type and other process technical forces. Companies actively respond to policies, into the research and development industry recycling, for the sustainable development of the industry to advance.
The company has always implemented the "people-oriented, honest management, customer priority, mutual benefit and win-win" development concept, give full play to innovative research anddevelopment, efficient service, lean operation and other professional advantages, to provide customers with customized, professional solutions, and high-quality products and solid technology to serve customers, in order to achieve the "to become a new material manufacturing and application areas of excellence in the enterprise" vision and continuous efforts.
Address:
Haizhou District, Chenguang Road, 2 City, Lianyungang, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Agriculture & Food, Auto, Motorcycle Parts & Accessories, Furniture, Industrial Equipment & Components, Light Industry & Daily Use, Manufacturing & Processing Machinery, Office Supplies, Sporting Goods & Recreation, Tools & Hardware, Toys
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000, ISO 20000, IATF16949
Company Introduction:
May Future (Lianyungang) New Materials Technology Co., Ltd. (hereinafter referred to as the company) is mainly engaged in new composite products and raw materials, mold equipment design, research and development, production, sales and service. The company′s main business is pulled profile products and their accessories, new materials boat, the whole bathroom, new materials, grille, a variety of pipe rods, with pull-squeezing molding, vacuum perfusion, SMC-BMC, winding molding, roll-made type and other process technical forces. Companies actively respond to policies, into the research and development industry recycling, for the sustainable development of the industry to advance.
The company has always implemented the "people-oriented, honest management, customer priority, mutual benefit and win-win" development concept, give full play to innovative research and development, efficient service, lean operation and other professional advantages, to provide customers with customized, professional solutions, and high-quality products and solid technology to serve customers, in order to achieve the "to become a new material manufacturing and application areas of excellence in the enterprise" vision and continuous efforts.